Update Samsung Galaxy S6 and S6 Edge with Android 5.1.1 Lollipop
Here is the good new for Korean Samsung Galaxy S6 and S6 Edge users, now they can update their phone with the latest official Android 5.1.1 Lollipop update. It’s the first 5.1.1 update for the Korean Galaxy phones, and comes with lots of bug fixes and improvements. If you are the use of Korean Galaxy S6 and S6 Edge phone and want to update your phone with this new update here is the complete guide which you will use on your phone and update the same.
The guide is only for the Korean Samsung Galaxy S6 and S6 Edge users and don’t try this method on any of the other models.
Your warranty is void if you follow the given instruction in this guide. We the Howtorootmobile.com team or the developers are not responsible for bricked devices, dead SD cards. Read all the instruction very carefully and Perform everything at your own risk.
CHECK PHONE MODEL
This guide is only for the Korean Samsung Galaxy S6 and S6 Edge android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.
PRE-REQUISITES AND REQUIREMENTS
Before following the below Mention guide, It’s always recommended to follow our pre-requisites and requirement to stay safe.
1. BACKUP YOUR ANDROID DATA
Do take the Full Backup of your Android Apps, SMS, Contacts, Call Logs, Bookmarks. This one is one of the most important steps that you have to follow, as we don’t want anyone losing their personal data or apps. For help on Backup and Restore check out the below mention guides.
2. INSTALL SAMSUNG GALAXY DRIVERS
First you need to Setup ADB and Fastboot Drivers on windows PC. This will help you to send basic Linux commands, and a variety Android-specific commands from PC to connected Android devices.
Now you need to install the USB drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system.
3. ENABLE USB DEBUGGING MODE
Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.
4. CHARGE YOUR ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
After following the above mention steps follow the below mention guide one by one to proceed with the tutorial. All the above mention steps are very important, so do follow all the steps and do exactly what is told.
Update US Cellular Galaxy S4 with Android Lollipop
Step 1. Download the firmware of your phone from the below mention links:-
- LG Uplus Galaxy S6 — G920LKLU2BOG5
- LG Uplus Galaxy S6 Edge — G925LKLU2BOG5
- SK Telecom Galaxy S6 — G920SKSU2BOG5
- SK Telecom Galaxy S6 Edge — G925SKSU2BOG5
- KT Corporation Galaxy S6 — G920KKKU2BOG7
- KT Corporation Galaxy S6 Edge — G925KKKU2BOG7
Step 2. After this download the ODIN.zip file here and extract the folder on your desktop.
Step 3. Once both the files are saved. Boot your phone in download mode. To do this Power off you phone and press and hold the volume down, home, and power buttons simultaneously.
Step 4. Once your phone is in download mode, connect it to the PC with USB cable and run the ODIN app on your desktop.
Step 5. From ODIN screen, click the “AP / PDA” button near the center of the window and select the firmware file that you downloaded on Step 1. Make sure re-partition is NOT ticked
Step 6. Click the “Start” button at the bottom of the screen to begin. Now the flashing process will start on your phone and this will take some time.
Step 7. When it’s done, the box in the top-left corner of Odin will read “Pass,” and your phone should automatically reboot.
That’s it. Now your Korean Samsung Galaxy S6 and S6 Edge are running on the Android lollipop