Root Samsung Galaxy Note 10.1 2014 3G P601, WiFi P600, LTE P605

If you are the proud owner of Samsung Galaxy Note 10.1 2014 3G P601, Note 10.1 2014 WiFi P600, Note 10.1 2014 LTE P605 and looking for the way to root your device. Here is the 100% working Guide for to root your devices. Rooting has lots of benefits, once your rooted your device you can enjoy lots of custom ROM, tweaks, Mods, and rooted apps on your android. In this guide we’ll show how to root your device with CF Auto Root Tool. The whole process is very simple and take a few minutes to completed. Read all the below mention instruction very carefully and follow them step by step on your device and PC.

WARNING!

Your warranty is void if you follow the given instruction in this guide. We the Howtorootmobile.com team or the developers are not responsible for bricked devices, dead SD cards. Read all the instruction very carefully and Perform everything at your own risk.

Root Samsung Galaxy Note 101

CHECK PHONE MODEL

This guide is only for the Samsung Galaxy Note 10.1 2014 3G P601, WiFi P600, LTE P605 android devices. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.

PRE-REQUISITES AND REQUIREMENTS

Before following the below Mention guide, It’s always recommended to follow our pre-requisites and requirement to stay safe.

1. BACKUP YOUR ANDROID DATA

Do take the Full Backup of your Android Apps, SMS, Contacts, Call Logs, Bookmarks. This one is one of the most important step that you have to follow, as we don’t want anyone losing their personal data or apps. For help on Backup and Restore check out the below mention guides.

BACKUP ANDROID APPS, SMS, CONTACTS, CALL LOGS, & BOOKMARKS
BACKUP ANDROID DEVICE WITH THESE FREE APPS
BACKUP AND RESTORE WHATSAPP MESSAGES

2. INSTALL SAMSUNG GALAXY NOTE DRIVERS

You need these drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system.

DOWNLOAD ANDROID USB DRIVERS

3. ENABLE USB DEBUGGING MODE

Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.

HOW TO ENABLE USB DEBUGGING MODE ON ANDROID DEVICES

Enable-USB-Debugging

4. CHARGE YOU ANDROID

If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.

After following the above mention steps follow the below mention guide one by one to proceed with the tutorial. All the above mention steps are very important, so do follow all the steps and do exactly what is told.

HOW TO ROOT GALAXY NOTE 10.1

[postad]

Step 1. Download the CF Auto Root file from given below links and extracts the folder on your desktop.

Note 10.1 2014 3G P601 Download Link | File name: CF-Auto-Root-lt033g-lt033gxx-smp601.zip (15.27 MB)

Note 10.1 2014 WiFi P600 Download Link | File name: CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip (15.0 MB)

Note 10.1 2014 LTE P605 Download Link | File name: CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip (19.44 MB)

Step 2. Download the ODIN flash tool here to flash the root package on your device and extract the folder on your desktop.

Step 3. Turn Off your Note and Boot your Galaxy NOTE 10.1 into Download Mode. To do this by pressing and keeping holding the Volume Down, Power and Home buttons simultaneous.

Step 4. Once your device in Download mode, connect it to the PC with USB cable and run the ODIN application on your desktop. Once the device is connected successfully, the ID: COM box of ODIN screen will turn blue with the COM port number. See the screenshot for example.

ODIN Com Port

Step 5. Click on the PDA button on Odin and select the CF-Auto-Root.zip file (Same file that you downloaded on the Step 1) And make sure that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.

Step 6. Double check all the settings and hit the Start button from the ODIN app to start the root process.

Step 7. The process will take some time and wait until you see a PASS! message in Odin’s top left box.

ODIN Pass message

Step 8. Once you see the PASS message on the ODIN app, your device will automatically reboot. Now you can disconnect your device from the PC.

 

Now your device is rooted and you can enjoy all the benefits of rooting on your Note 10.1. In case at the time of restart your device stuck on Android loop or stuck on Android boot screen, then follow this guide to come out of Android loop.

For more future updates Add us on Google+ and Like our Facebook page here

Web
Analytics Made Easy - StatCounter