If you are the owner of Samsung Galaxy Note 10.1 (2014 Edition) and looking for the tutorial to root your device thanks to XDA Senior member beanstown106 for releasing the root method for Galaxy Note 10.1. To root your device all you have to flash a few files in Odin. Galaxy Note 10.1 2014 Edition features a 10.1-inch WQXGA (2560X1600) Super clear LCD display and powered with 1.9GHz quad-core Exynos 5 Octa processor, 3GB of RAM, 16GB built-in storage, 8-megapixel rear camera with LED flash and includes Wi-Fi, Bluetooth, Wi-Fi Direct.
After rooting your device you will enjoy lots of Custom ROMS on your device, enjoy Tweaks and rooted applications too. The current method is only for the Galaxy Note 10.1 (2014 Edition) P600 models, don’t try this method on any of other android models. Warning! Rooting voids your warranty, perform all actions at your will. Howtorootmobile or the developer shall not be held responsible for any damage to your device. Read all the instruction very carefully and follow them step by step on your PC and your device.
Pre-requisites and Requirements
a) Before following the guide do take the Full Backup of your Android Apps, SMS, Contacts, Call Logs, Bookmarks. Looking for more ways to get the Backup your android device click here. So in case if you lost some of your important data and files in the update or rooting process, then you can easily restore them from your backup file. Read also how to take the backup of WhatsApp messages and restore it.
b) Once the backup files are saved on your device or on your desktop, Enable USB debugging mode on your device, read the guide here how to enable USB debugging mode.
c) Make sure that your Galaxy Note 10.1 battery is full charge or near about 60-70% battery level.
d) Download the Latest Samsung Galaxy Note 10.1 USB drivers on your PC and install it to start the update process. You need these drivers to connect your device with the computer to follow this guide.
After following the above mention steps follow the below mention guide one by one to root Galaxy Note 10.1. All the above mention steps are very important, so do follow all the steps and do exactly what is told.
Instructions to Root Galaxy Note 10.1 (2014 Edition)
Step 1. Download the root package “p600Autoroot.7z” here and extract the folder on your desktop. In the Folder you will see two files “autorootp600mj4.tar.md5” and “stockrecoverymj4.tar.md5”.
Step 2. Download the ODIN flash tool on your Windows Desktop and extract the folder on your desktop to proceed.
Step 3. Turn off your device and boot it in Download mode. To do this Hold Volume Down + Power. Follow the instructions on the screen.
Step 4. Once your device in Download Mode, Connect your phone to the pc with USB cable and run the ODIN.exe file to open the application on your desktop.
Step 5. Now from the ODIN Screen Click on “AP” button on Odin and select the “autorootp600mj4.tar.md5” file (File that You downloaded on Step 1)
Next, ensure that the check boxes “Auto Reboot”, “F. Reset Time” and “AP” are the only check boxes checked and the rest are not. And Make sure re-partition is NOT ticked on the ODIN application
Step 6. Click start and wait for some time to run the root process.
Step 7. Once your device is rooted, Again reboot into download mode again and flash the stock “stockrecoverymj4.tar.md5” with ODIN tool. (See step 5)
That’s it, now your device is rooted. To confirm the root download the root checker application from the Google play store and confirm. In case at the time of restart your device stuck on Android loop or stuck on Android boot screen, then follow this guide to come out of Android loop.