Install Android 4.2.2 Jelly Bean Leaked on Galaxy Note 8.0 GT-N5110
Samsung mobile phone are one of our favorite devices, the best part of the Samsung is that they are working hard to roll out the latest version of Android update to its devices. Now the new Android 4.2.2 Jelly Bean Leaked firmware is available for the Galaxy Note 8.0 WiFi GT-N5110 users. If you the owner of Galaxy Note 8.0 GT-N5110 device than you apply this new leaked update on your device, the new firmware has the some new features and performance improvements to the device. Currently there is no information on the Android 4.2.2 roll out for the Note 8.0. But you can apply this update on your device, this one id the official leaked firmware N5110XXCMG2 for Galaxy Note 8.0 GT-N5110. The firmware is only available for Galaxy Note 8.0 WiFi variant with model number GT-N5110, so don’t try this leaked firmware on any of your other devices.
So below is the full Guide to Install Android 4.2.2 Jelly Bean Leaked on Galaxy Note 8.0 GT-N5110. Those who wish to install XXCMG2 Android 4.2.2 leaked official firmware on their Note 8.0, may follow our guide. Read the whole guide carefully and follow the below mention step one by one.
How to Install Android 4.2.2 Leaked Firmware on Galaxy Note 8.0
Step 1. First and most important thing is backup. So follow this link to take the full backup of your Samsung Galaxy Note 8.0 GT-N5110.
Step 2. Once the Backup is completed on your device, download these latest Samsung USB drivers on your PC and install it. Without these drivers you can’t install the firmware on your device.
Step 3. Make sure that your phone battery is full charge or near about 60-70% battery level.
Step 4. Enable USB debugging mode on your HTC one, To do this go to Settings >> Applications. From there navigate and click on Development option and check the USB Debugging Mode. Or read this guide how to enable USB debugging mode.
Step 6. Turn off your Galaxy Note 8.0 GT-N5110 and boo the device in Download mode. press and hold Volume Down + Home + Power buttons at the same time for 2-3 seconds and press Volume Up key to enter Download Mode.
Step 7. Once the device is in Download mode connect the device with the PC via USB cable. Now Run the ODIN application on your desktop, if the device is connected successfully the ID: COM box of ODIN screen will turn blue with the COM port number.
Step 8. Now on ODIN application you have to browse some files to update your devcie, Follow this process very carefully. Select these files extracted from the Androdi 4.2.2 Firmware folder to install on phone
Click PDA button and select file with .tar.md5 extension
Click Phone button and select file with Modem in its name
Click CSC button and select file with CSC in its name
Click PIT button and select the .pit file
Note: Ignore last three steps if such files are not found and make sure that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 9. Now hit the Start button form the OSIN screen and wait for some to flash the update on your device.
Once the update process is completed on your Note 8. 0 you will see the PASS message on your ODIN screen. Now you can Unplug the USB cable from the device to disconnect it from the computer. The new firmware is installed on your Galaxy Note 8.0 GT-N5110, In case at the time of restart your device stuck on Android loop or stuck on Android boot screen, then follow this guide to come out of Android loop.